Chlorine gas detection

By using the plug and play version of the system, operators can use their own maintenance staff to install the system. IGD can provided backup support to ensure detectors are placed in the most effective locations. Detectors are delivered pre-calibrated and will operate to specification on power up. IGD’s Sentinel communications protocol ensures devices remain correctly connected and operate within limits. With plug and play detectors there are no wiring errors.

On power-up the TOC-625 micro system asks the user if they are ready to self-discover connected devices. The system then auto detects all devices connected to the controller and automatically sets channel displays and alarm levels. This allows plant operators to deliver an ‘on budget’ safety system without any compromises.

For ongoing maintenance, the system should be calibrated at least once a year. Chlorine detectors can be calibrated by exchange rather than requiring costly site visits. As the settings are saved on the detector heads, you can easily swap the front of the detector for service and replace it with a new sensor from IGD with our exchange deal. A simple and cost-effective solution for a difficult challenge.

Finally, with IGD’s Sentinel protocol, the protocol continuously monitors the system performance. With our ground breaking SensorCheck Technology, every second the system checks for; Zero drift, temperature drift, reliable communication and sensor voltage, being within acceptable limits. Every event is reported to the panel immediately, with a clear message on the panel display unlike many systems on the market that warn you up to 6 hours later.