Explosion-proof lighting

Unfortunately, the high requirements put forward in Ex type certification doesn’t guarantee that a light fitting is fit-for-purpose. In many cases, installation of Ex fittings that suffer from water ingress or that are negatively impacted by vibration imposed by site installation, causes significant need for operational maintenance and repair work.

In a hazardous environment, the cost of a non-productive shutdown in order to service or repair failed lighting, must also be considered. The more remote the installation (e.g. in the middle of an ocean or desert) the more likely that the costs of maintaining and repairing that lighting will be extremely high.

Buying a less expensive explosion-proof lighting product can often prove more expensive over the long term. Often the purchase price accounts for a relatively small percentage (20-40 per cent) of the overall costs. So what’s the point in saving a couple of pounds here and there on the purchase price if this means higher servicing or repair costs due to inferior quality lighting components? Resulting in higher maintenance overheads and a reduced service life of the light fitting? Or lighting failure that results in unplanned downtime, leading to lost production or delayed deliveries?

For lighting designed/selected for a given application, the TCO is equivalent to the sum of the following:

Initial cost/purchase price + installation/commissioning costs + energy costs + operation cost + maintenance cost (routine and planned) + downtime costs.

In hazardous areas, these types of purchasing decisions are further complicated by European and International Health & Safety Standards, which allow lighting (and other electrical equipment) to be marked with an ”X” at the end of the certificate number.

According to EN 60079-0 the symbol ”X” is used to denote specific conditions of use. The symbol X is used to provide a means of identifying that essential information for the installation, use and maintenance of the lighting equipment is contained within the certificate. The symbol denotes that the equipment is subject to ‘specific conditions for safe use’, which is specified in the schedule to the certificate. The problem here is that the symbol itself may denote an enhancement but could also denote a limitation. This means the owner of the equipment should be aware of the meaning of the X on the lighting in use. It could mean that a risk assessment needs to be carried out on the equipment.  It is therefore essential that engineers understand the subtle technical differences between lighting products from different manufacturers. Although different products may both carry the same ATEX classification, the customer must also consider the possible hidden costs of the ”X” symbol if it appears on the certificate.

For example, take explosion-protected overhead LED lighting installed in a hazardous gas or dust atmosphere. As long as the lighting unit carries the required ATEX classification and test certification, you, the end user, may not be duly concerned with any ”X” marked on the certificate.

The problem here is a common one that many of us can relate to. With any conditions of use for a certain product, these conditions are very rarely published in the glossy product catalogues or flyers. The conditions of use are normally stated in the product certification documents supplied with the product, which means they are seldom read, as we tend to throw away the instructions.

The conditions of use are directly linked to the TCO or lifecycle costs of the product. If we do not choose the correct product for the right environment, lifecycle costs can increase dramatically, particularly when additional maintenance is required over and above that required by a similar product. For example, the end user may have to inspect the light fittings every 12 months, resulting in significant maintenance costs and an increased TCO.

Glamox supplies a comprehensive range of explosion-protected lighting, including both fluorescent and LED lighting for hazardous areas.