Glamox extends its TX65 range

In addition to the existing pole- or ceiling-mounted units, a new baseplate mounting option is also available, which simplifies direct replacement of alternative lighting products with the TX65. As well as 120V and 230V options, there is also a new 254V option.

The TX65 range of Ex-protected LED multi-purpose area lights from Glamox is manufactured in accordance with the European Directive (ATEX) and IECEx standards. The lights are suitable for installation in Zone 1 and 2 hazardous gas environments and can also be supplied as a two-module version. The lights are designed for general illumination duties at medium and high suspension heights in harsh, hazardous environments, particularly onshore oil refineries, petrochemical plants and offshore oil and gas platforms.

The innovative design of the multi-purpose area light provides a combination of benefits for end users, including high energy efficiency, superior lighting quality and longer operating life (100,000 hours at 45°C ambient temperature), resulting in significant savings in installation, operation and maintenance costs.

Gordon Low, Area Sales Manager at Glamox International comments: “Compared to conventional, equivalent high pressure sodium lamps, the TX65 can reduce energy consumption by up to 75 per cent. The TX65 is designed as a virtually maintenance-free unit, resulting in significantly increased maintenance intervals – typically five to ten times higher than conventional lighting solutions.” 

“As hazardous area lights are normally installed in inaccessible locations that are difficult to reach without using scaffolding or rope access, the increased maintenance intervals associated with the TX65 result in substantial cost savings for end users, particularly if they have hundreds or thousands of lamps installed. Reduced maintenance also means reduced risk of injuries to workers accessing the area lights,” added Low.
Heat management is a critical factor in the operational life and energy efficiency of an LED area light. The TX65 is designed to meet this challenge, providing a high-quality light output and high performance in ambient temperatures ranging from -50°C to +55°C. The degree of protection of the TX65 is achieved without the use of flame paths that would require inspection and maintenance. The TX65 also offers a superior colour rendition index compared to high-pressure sodium lamps, therefore providing an improved working environment.

Conventional hazardous area lighting technology has high mercury content, whereas the TX65 contains no toxic substances. The energy consumption, CO₂ and NO_X emissions are approximately 70% less than conventional floodlights. Furthermore, because of its significantly reduced power consumption with no inrush currents, the number of electrical circuits required for the TX65 can be reduced (more floodlights can share the same circuit). 

The life of an LED light fitting is dependent on the technology used, the installation environment and the ambient temperatures. At a typical onshore oil refinery or petrochemical plant, the TX65 maintenance intervals may increase by as much as five times compared to conventional lighting solutions. Under optimal conditions, the TX65 multi-purpose area light will last the lifetime of the installation itself.

The TX65 is available with lumen output ratings from 3000 lm up to 9000 lm (2-module version). The TX65 is also covered by a five-year warranty. For more information on the TX65, please visit www.glamox.com/gmo